Random Section of GOST 2.601-95
184.108.40.206.1 Sub-section “Service” contains rules and procedure of changing and refilling POL with indication of their quantity and brand according to the appropriate normative document as well as condition and procedure of filling the item of equipment with duplicating (reserved) POL or if necessary with imported POL.
220.127.116.11.2 Sub-section “ Dismantling and assembling” contains procedure of operations during dismantling and assembling, list of appliances and tools required for disconnection, withdrawal, installation and connection of assembly units (parts), safety measures, list of adjustment operations after assembling. The instruction “Installation shall be carried out in reversed sequence” may not be provided.
18.104.22.168.3 Sub-section “Adjustment and tests” contains the procedure of performance of operations which are necessary for adjustment of a component of the item of equipment to obtain required technical characteristics and parameters.
22.214.171.124.4 Sub-section “Inspection and checks” contains the procedure of performance of operations which are necessary to provide the access to the inspected part of the item of equipment; kinds and methods of inspection and checks thereof; procedure of operations to be performed for conducting technical inspection of the components of the item of equipment by the bodies of inspection and supervision and for evaluation of technical condition of components of the item of equipment when determining the necessity to deliver them for repairs.
126.96.36.199.5 Sub-section “Cleaning and painting” contains the procedure of operations on cleaning and painting components of the item of equipment, conditions of performance of these operations and the list of tools, appliances and materials to be used.
188.8.131.52.6 Sub-section “Preservation” contains requirements similar to those specified in p. 184.108.40.206.6.
5.1.6 Part “Routine repair” contains information required for organization and performance of routine repairs of the item of equipment and its components under operational conditions and consists of the following sectionsв:
— routine repair of the item of equipment;
— routine repair of components of the item of equipment.
220.127.116.11 Section “Routine repair the item of equipment” contains sub-sections:
— general instructions;
— safety measures.
18.104.22.168.1 Sub-section “General instructions” contains requirements to carrying out repairs, methods of repairs, requirements to the qualification of the personnel, description and characteristics of diagnostic capacities of the built-in control systems and the list of components of the item of equipment, the routine repairs of which can be performed only at special repair enterprises, description and characteristics of diagnostic capacities of external fault finding aids. If necessary faultfinding diagrams shall be included in this sub-section.
22.214.171.124.2 Sub-section “Safety measures” contains safety regulations to be observed during performance of operations in accordance with normative documents in force.
126.96.36.199 Section “Routine repairs of the components of the item of equipment” contains instructions on fault finding and remedies as applied to each component of the item of equipment, the routine repair of which is possible in the process of operation. The section consists of the following sub-sections:
188.8.131.52.1 Sub-section “Faultfinding” contains instructions on the sequence and scope of works required for faultfinding.
184.108.40.206.2 Sub-section “Remedies” contains instructions on methods of elimination of the consequences of failures and damage as well as the list of necessary measuring aids, tools and appliances. It is recommended to execute the sub-section in the form of a chart (see Exhibit A).